Whitehead's varnish nasal pack

Whitehead's varnish is a little known but excellent nasal packing agent. We review available literature on the historical aspects and clinical use of Whitehead's varnish. Our personal experience with Whitehead's varnish is described, and we strongly recommend its use

Design and Development of AOBA VELOX-IV Nanosatellite for Future Lunar Horizon Glow Mission

This paper highlights the mission, design and development of the 2U CubeSat AOBA VELOX-IV by Nanyang Technological University (NTU), Singapore and Kyushu Institute of Technology (Kyutech), Japan. The satellite mission is the precursor for future lunar exploration missions, addressing the challenges in attitude and orbit control of a nanosatellite in Moon’s orbit. Innovation includes miniature four-head pulsed plasma thruster for orbit maintenance, attitude control, momentum dumping; low-light camera with horizon sensing capability; and synchronized ground stations to locate the satellite using downlink signals. The satellite design must pass intensive safety reviews by JAXA; some design revisions due to launch requirements, such as hold-down and release mechanism redundancy, power inhibits, and structure, will be discussed. Development of AOBA VELOX-IV follows the proto-flight model (PFM) approach. A flat satellite was built to interface hardware and test firmware. A structural thermal model (STM) was assembled with subsystems QM/EM and went through qualification tests to confirm the design. AOBA VELOX-IV is scheduled to be launched into low Earth’s orbit by JAXA in Q1 2019. Integration of the satellite PFM completed in April 2018, followed by acceptance tests in NTU and Kyutech during May - July 2018

Spin orbit torque induced asymmetric depinning of chiral Néel domain wall in Co/Ni heterostructures

In this letter, we report on distinct depinning of a chiral Néel domain wall (DW) driven by spin-orbit torque (SOT) in Co/Ni nanowires with symmetric potential barriers. In these structures, DW propagation was shown to be in the opposite direction to the electron flow as evidenced from current assisted DW depinning measurements. A transition from field dominated DW depinning to SOT dominated DW depinning was observed as the bias current was increased. For SOT dominated DW depinning, the Up-Down DW exhibits a larger depinning field as compared to the Down-Up DW. This is attributed to the interplay between the SOT and Dzyaloshinskii-Moriya interaction in the structure

A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS

This paper presents the case study on the Hotel New World tragedy. The building collapsed on 15th March 1986 and an investigation was conducted to determine the main cause of this tragedy. There were several speculations made on the cause of the collapse such as internal explosion, bad concrete mixture and swampy land affecting the building’s foundations. However, after thorough investigations, these speculations were proved to be inappropriate and the main cause was found to be due to the engineer’s miscalculation during the designing stage which leads to this catastrophic failure of the building. Rescue operation was initiated immediately after the collapse to rescue the victims and the aftermath of this tragedy had led to multiple reclamations. These reclamations include the endorsement of Building Control Act 1989 along Building Control (Accredited Checkers) Regulations 1989 as a stricter quality control measure. The analysis shows that this case may be due to unwanted mistakes or negligence of the engineers in carrying out their duties. Several actions were taken according to the ethical theories and codes of ethics. However after the analysis and evaluation were done, duty ethics and right ethics were more relevant to the collapse of Hotel New World case as compared to the other ethical theories and thus reclamations were done based on duty ethics and right ethic

A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS

This paper presents the case study on the Hotel New World tragedy. The building collapsed on 15th March 1986 and an investigation was conducted to determine the main cause of this tragedy. There were several speculations made on the cause of the collapse such as internal explosion, bad concrete mixture and swampy land affecting the building’s foundations. However, after thorough investigations, these speculations were proved to be inappropriate and the main cause was found to be due to the engineer’s miscalculation during the designing stage which leads to this catastrophic failure of the building. Rescue operation was initiated immediately after the collapse to rescue the victims and the aftermath of this tragedy had led to multiple reclamations. These reclamations include the endorsement of Building Control Act 1989 along Building Control (Accredited Checkers) Regulations 1989 as a stricter quality control measure. The analysis shows that this case may be due to unwanted mistakes or negligence of the engineers in carrying out their duties. Several actions were taken according to the ethical theories and codes of ethics. However after the analysis and evaluation were done, duty ethics and right ethics were more relevant to the collapse of Hotel New World case as compared to the other ethical theories and thus reclamations were done based on duty ethics and right ethic

A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS

This paper presents the case study on the Hotel New World tragedy. The building collapsed on 15th March 1986 and an investigation was conducted to determine the main cause of this tragedy. There were several speculations made on the cause of the collapse such as internal explosion, bad concrete mixture and swampy land affecting the building’s foundations. However, after thorough investigations, these speculations were proved to be inappropriate and the main cause was found to be due to the engineer’s miscalculation during the designing stage which leads to this catastrophic failure of the building. Rescue operation was initiated immediately after the collapse to rescue the victims and the aftermath of this tragedy had led to multiple reclamations. These reclamations include the endorsement of Building Control Act 1989 along Building Control (Accredited Checkers) Regulations 1989 as a stricter quality control measure. The analysis shows that this case may be due to unwanted mistakes or negligence of the engineers in carrying out their duties. Several actions were taken according to the ethical theories and codes of ethics. However after the analysis and evaluation were done, duty ethics and right ethics were more relevant to the collapse of Hotel New World case as compared to the other ethical theories and thus reclamations were done based on duty ethics and right ethic

Maxillary sinus haematoma

The maxillary sinus haematoma is an uncommon cause of a maxillary sinus mass. It presents with a variety of symptoms, the most common being epistaxis. Although histologically benign, it may be clinically progressive. Radiological findings can range from a benign appearance to a more aggressive process, including bony erosion. Surgical evacuation is the mainstay of therapy. We describe our experience in managing this condition and review available literature on the subject

Antioxidant-mediated protective role of Hericium erinaceus (Bull.: Fr.) Pers. against oxidative damage in fibroblasts from Friedreich’s ataxia patient

Friedreich’s ataxia (FRDA) is a progressive neuromuscular disorder caused by substantial decrease of mitochondrial protein frataxin responsible for biogenesis of iron-sulphur clusters and protection from oxidative damage. In this study, we investigated the antioxidant activities of a standardized aqueous extract from fruiting bodies of Hericium erinaceus mushroom (HESAE) and its protective effects against oxidative damage induced by L-Buthionine sulfoximine (BSO) in fibroblasts derived from FRDA patient. The lactate dehydrogenase-based viability assay showed that FRDA fibroblast was sensitive to 12.5 mM BSO with a reduction of viability to 52.51 ± 13.92% after 24 h of BSO exposure. Interestingly, co-incubation with 32 mg/mL HESAE increased the viability to 85.35 ± 3.4%. Further, 12.5 mM BSO caused a decrease in the ratio of cellular reduced glutathione (GSH) to oxidised GSH (GSSG) that leads to cell death. Nevertheless, the damage was reduced by co-incubation with 32 mg/mL HESAE. Nuclear fluorescence staining revealed that 12.5 mM BSO induced cell death and the apoptosis was decreased by co-incubation with HESAE. These findings suggest the ability of HESAE in attenuating BSO-mediated cytotoxicity through maintenance of membrane integrity and optimal GSH/GSSG ratio, that are closely linked to its antioxidant activities. Further in vivo trials are highly warranted to clarify its potential benefits in management of FRDA

The perspective of students on drivers and benefits of building information modelling incorporation into quantity surveying profession in Klang Valley Malaysia

Building Information Modelling (BIM) is a very useful tool that facilitates architecture, engineering and construction (AEC) professionals and stakeholders in planning, designing and constructing the buildings through 3D models. BIM can be widened to building operations and data storage which can be accessible by owners and others. Such data help owners and stakeholders to generate results according to the information gained through BIM models. The objectives of this study were to identify the perspective of students on drivers of BIM incorporation into the quantity surveying profession and to identify the perspective of students on benefits of BIM incorporation into the quantity surveying profession. A questionnaire survey was carried out to gain the students’ perspective on drivers and benefits of BIM incorporation into the quantity surveying profession in Klang Valley, Malaysia. Specifically, this study investigated twelve drivers and fourteen benefits of BIM incorporation into the quantity surveying profession. The top three drivers were improving the capacity to provide whole-life value to the client, desire for innovation to remain competitive and strong support from university management and industry. The top three benefits were BIM provides fast, effective and efficient quantity take-off and cost estimation, time savings in the preparation of estimating cost and improved visualization for better understanding of designs for measurement and minimise omissions. For future research, it is recommended that the study be replicated at other regions so that a clearer view of this topic can be obtained. Besides, qualitative research methods could be used in identifying other drivers and benefits not covered in this study. By answering the questions in the survey form, the students were able to gain some knowledge on BIM and its importance to the quantity surveying profession. Also, it would be interesting to include industrial practitioners in this kind of study, allowing comparisons of the results between academia and industry at a later stage. Nonetheless, this study benefited the undergraduate students pursuing the Bachelor of Science (Hons) Quantity Surveying programme, universities, colleges and other institutions that offered the quantity surveying programmes at various levels and quantity surveyors working in the construction industry by exposing them to a comprehensive list of drivers and benefits of BIM incorporation into quantity surveying profession. In a way, this study helped promoted BIM and its implementation in the field of quantity surveying in Klang Valley, Malaysia